If you’re using water for your remedy preparations you need to take several things into account.
Why? You are using water as a carrier for frequency signatures, so the water should be free of contaminations of different origins.
What is in our drinking water that does not belong in it?
Medicines: Such as painkillers, antidepressants, anti-epileptics, antibiotics, asthma drugs, heart medication (including statins, which are drugs that lower cholesterol in the blood), etc., etc.
The soothing words of the health authorities can be summed up with: Only small amounts of these substances are involved!
But what if it contains more than 50 different drugs? Nothing is known about the long-term effects of low doses of this medication, and even less about the interaction of so many drugs together.
In addition to medication, pesticides, herbicides and fungicides have also been found in drinking water. To reassure us, these often highly toxic substances have been renamed. Rather than simply calling them pesticides, they have been renamed the more friendly name: crop protection products. A clear form of language pollution.
The water purification companies are unable to remove these substances from the water. Incidentally, the part of the agricultural poisons and medicines that are removed is in most cases discharged into the surface water. (lakes, rivers, sea)
Bacteria, viruses and parasites are also found in drinking water and the classic way to combat this is chlorine treatment. This kills most microbes, but not all. There is also a risk that the chlorine will bind with certain organic compounds, eg. THMs, the trihalomethanes. These are carcinogenic and can cause bladder, colon, and pancreatic cancer as well as brain tumors.
5 steps to purify water for healing purposes
Step 1 – Distilling water
Water distillation follows the natural water cycle: The sun heats the water in the sea, lakes and rivers. The water evaporates, rises and when it cools, the water condenses and falls as rain. Rain, snow, hail, fog, and dew are all examples of distilled water.
But we can mimic the natural water cycle itself with a device that heats the water so that it evaporates. Then the water vapor is cooled, causing it to condense (become liquid again). The pure water is then collected in a collection vessel.
This procedure produces very clean water and is independent of the quality of a filter process: With carbon or a membrane you won’t be able to filter out everything; you need to replace filters regularly.
All substances with a boiling point above 100 degrees Celsius do not pass into the vapor form and therefore do not end up in the end product, your pure drinking water.
The obvious advantage of pure water is that it is free from toxic carcinogenic substances such as heavy metals and is also free from bad-tasting chemicals such as chlorine etc. This means that you remove all metal residues such as copper and iron and also the heavy metals such as mercury, cadmium, lead, etc.
This also applies to all inorganic minerals such as calcium, magnesium, sodium, etc. And of course also that there are no more medicine residues left by others, which we have not asked for.
Step 2 – Revitalizing water
After the distilling process, the water requires revitalizing with a vortexer. The water swirls in one vortex for about 9 minutes. As a result, your water is ionized and supplied with oxygen, making the body absorb it faster.
There are several vortex devices available from the internet varying between $50 to $600.
Step 3 – removing unwanted energy signatures from water/alcohol/ointments
Now, this step is essential since we are imprinting subtle energy signatures to water through the reprinter cup of the NLS-system. If the water you’re using still contains ‘other’ frequency signatures the effect of the remedy will be less effective.
Few affordable techniques are known to prove the energetic contamination of water except for the test that Dr. Masaru Emoto and Prof. William Tiller did. They simply let water crystalize and compared the crystalization patterns.
You can simply do this test in your practice and see the results for yourself.
Just take to microscope glass slides or Petri-dishes and drop some water onto them and let them freeze.
Examine the samples under a microscope: they will speak for themselves.
You can use a Schumann generator (7,83) to remove unwanted energy signatures. We personally use the AO 2000 Aqua Optimizer from Karl Welz.
Put the glass bottle or jar with the distilled and revitalized water (or alcohol or ointments) on the AO-2000 for about 15 minutes.
If you do now the crystalization test of Dr Masaru Emoto, you’ll see the difference. You’ll also notice that the remedy preparations made with your reprinter cup become much more effective if you treat water/alcohol/ointments this way.
Disclaimer
The medical information on this site is provided as an information resource only and is not to be used or relied on for any diagnostic or treatment purposes. This information is not intended to be patient education, does not create any patient-physician relationship, and should not be used as a substitute for professional diagnosis and treatment. Please consult your healthcare provider before making any healthcare decisions or for guidance about a specific medical condition. NLS-Academy shall have no liability whatsoever suffered as a result of your reliance on the information contained in this site.